UBS Accounting Software » General

ID #1018

This batch is reserved for pin 0


Message  prompted: ”This batch is reserved for pin 0”, when  user  login as Pin_4 and add transaction into the  batch.  The solution below is is explaining the  fact of this issue and will show the steps to overcome it.



That was because Batch 2 was created and reserved for Pin_0.  To allow Pin_4 access to Batch 2, the steps are: 

1.  Logout and login again using Pin_0;  

2.  Go to Boss menu, click on “Change Batch  Lock Status & Pin No.“, in Pin column against Batch 2,

change the  pin from 0 to 04; Exit. 

3.  Logout and login again as Pin_4, now you should be able to access  to Batch 2.

Tags: This batch is reserved for pin 0

Related entries:

Last update: 2010-11-08 06:55
Author: Noor Diyana
Revision: 1.1

Digg it! Share on Facebook Print this record Send FAQ to a friend Show this as PDF file
Propose a translation for Propose a translation for
Please rate this FAQ:

Average rating: 1 (1 Vote)

completely useless 1 2 3 4 5 most valuable

You cannot comment on this entry