UBS Accounting Software » General

ID #1018

This batch is reserved for pin 0

Description  

Message  prompted: ”This batch is reserved for pin 0”, when  user  login as Pin_4 and add transaction into the  batch.  The solution below is is explaining the  fact of this issue and will show the steps to overcome it.

 

Solution  

That was because Batch 2 was created and reserved for Pin_0.  To allow Pin_4 access to Batch 2, the steps are: 

1.  Logout and login again using Pin_0;  

2.  Go to Boss menu, click on “Change Batch  Lock Status & Pin No.“, in Pin column against Batch 2,

change the  pin from 0 to 04; Exit. 

3.  Logout and login again as Pin_4, now you should be able to access  to Batch 2.

Tags: This batch is reserved for pin 0

Related entries:

Last update: 2010-11-08 06:55
Author: Noor Diyana
Revision: 1.1

Digg it! Share on Facebook Print this record Send FAQ to a friend Show this as PDF file
Propose a translation for Propose a translation for
Please rate this FAQ:

Average rating: 1 (1 Vote)

completely useless 1 2 3 4 5 most valuable

You cannot comment on this entry